国产中文无码av每日更新在线观看, 亚洲天堂中文字幕一区二区三区免费, 国产口爆吞精在线观视频-黄色国产, 92福利-国内精品久久久久久99,亚洲成AV人A片不卡无码,浪潮AV无码专区,老熟女败火白浆,中文字幕日产av,色情日本免费看大片

1. Leading and managing process engineering team (normally 5-12 members), to
ensure manufacturing process comply with medical device standards and
regulatory requirements; Take responsibility on target management, performance
review and communication, coaching and development with each team member;
帶領和管理工藝工程團隊(通常5-12人), 來確保制造工藝符合醫療器械行業標準和法規要求; 負責與團隊成員的目標設定、績效回顧及溝通、輔導和發展等;
2. Take responsibility of develop key procedure/instructions/templates to be
professional and standard, to identify PDCA cycle to keep improving whole team
understanding on documents and compliance(regualations, standards, quality
system);
負責主要流程、指引、模板的專業化標準化, 制定PDCA流程以持續改善團隊對文件的理解及合規合體系的風險考量;
3. leading team to focus on related process daily issues and problem solving,
investigating and root cause definition, correct and prevent issues by
short-term and long-term solutions;
帶領團隊關于相關工藝的日常問題解決, 調查和識別根本原因, 采取短期長期措施修復和預防相關問題;
4. leading team to focus on related manufacturing process performances
improvement through CIP tools such as lean, 6 sigma or other approach. Support
production team to secure production performance, improve efficiency and reduce
cost;
帶領團隊以CIP工具（如精益、6 Sigma等）, 改進制造工藝及技術以不斷提升制造水平. 支持生產團隊確保制造水平, 提升效率, 降低成本;
5. leading team to focus on related process lifecycle management, to test and
validate new materials, new process, new technology etc.
帶領團隊關注相關工藝的生命周期管理, 測試和驗證相關新材料、新工藝、新技術等;
6. leading team to support projects, including new products introduction, new
production line build up, Automation & digitalization; to support audit from
Zeiss group, regulatory agent, Government, etc.
帶領團隊支持相關項目包括新產品導入, 新生產線建立, 自動化和數字化等; 支持來自蔡司集團、監管機構、政府的審核等;
1. Minimum 5 years supervisory experience required, or young talent;
最少5年作為團隊主管的相關經驗, 業績優秀或表現突出的人才可適當放寬；
2. Minimum 5 years’ experience in process engineering required
最少5年工藝或制造工程類相關經驗；
3. Experinece in manufacturing of medical device or Pharmacy or any product in
high quality/high technology standard environment (e.g. automotive electronics,
semiconductor) is preferred
具有醫療器械制造行業或制藥或其他高質量/高技術標準（如汽車電子，半導體）制造業相關工作經驗優先
4. Experience of intercontinental production line transfer and process
equipment installation/validation/trouble shooting is preferred.
國際間生產線轉移和工藝設備安裝/驗證/故障排除經驗者優先
5.Experience in lean manufacturing, or six sigma
具備精益制造或6西格瑪經驗