Job Profile: Engineering > General Engineering
SUMMARY
Responsible for the Test Engineering Process and the attributes that can affect the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
- Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
- Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
- Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
- Ensure all process manuals and documentation are maintained properly.
- Review all 5x5 tests to ensure that they were performed and adhered to.
- Perform walkthroughs, inspections, product evaluation and testing as needed.
- Conduct NPI test evaluations.
- Prevent test escapes.
- Ensure product testing completeness and reliability.
- Update and generate documentation as required.
- Assist Project Test Engineer with test process review.
- Evaluates test probes.
- Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
- Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
- Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
- Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
- Label and stamp boards, and fill out tags.
- Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
- Ensure assemblies are properly handled and marked.
- Ensure daily logs and move/production tickets are accurately maintained.
- Follow simple, standardized and routine written directions for assigned test operations.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Typically reports to Management. Direct supervisor job title(s) typically include: Production Supervisor, Production Manager
- Job is NOT directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management).
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
EDUCATION & EXPERIENCE REQUIREMENTS
- Associates of Science in NT Electronics or Electrical Engineering or Technical Certification preferred
- Three (3) to five (5) years experience
- Or an equivalent combination of education, training or experience
工作職責：
1.參與產品設計輔助，產品性能驗證，以及制造工藝研發和工業化。
2.開發新的工藝流程，針對新產品或新技術進行優化，以確保生產過程順利進行并達到預期的性能和質量標準。
3.收集、分析生產數據，發現潛在問題并提出改進方案，以提高生產效率和產品質量。
4.持續跟蹤生產過程，識別改進機會，并與其他部門合作推動改進項目的實施，以提高生產效率、降低成本和提升產品質量。
（此崗位作為技術專家組儲備人才培養，產品方向）
職位要求
1. 專業要求：機械工程、機電一體化、自動化、測試儀表等相關專業碩士學位英語6級或以上，英文口語流利。
2. 熟練使用CAD 軟件進行產品和工裝夾具設計。
3. 熟練使用MiniTab / JMP /Excel/ Python等軟件進行數據分析。
4. 對工程技術感興趣，對工程技術基礎原理有良好的理解。
5. 良好的溝通能力和團隊合作精神。
6. 良好的邏輯思維與問題解決能力。