主要職責
1. Work for project design and new function development with mechanical and software team.
與機械和軟件團隊一起進行項目的設計和新功能開發;
2. Crossbelt sorter localization.
交叉帶分揀機本地化;
3. FlyDragon development.
飛龍開發;
4. PLC Programming and onsite commissioning.
PLC編程與現場調試;
5. HMI, SCADA configuration and programming.
HMI、SCADA配置與編程;
6. Supervise the installation of equipment such as distribution cabinet, Control cabinet, electrical parts, etc.
現場設備安裝指導,比如電控柜、配電柜、電氣器件等;
7. Implement system test.
進行系統測試;
8. Support pre-sales project with its technical feasibility analysis and risk analysis.
支持售前項目的技術可行性分析并做出風險評估
9. Stick to the project schedule strictly, make project schedule and be highly aware of the cost and time allocated to controls job.
嚴格遵循項目節點,指定項目計劃,并有強烈的時間、成本意識;
10. Other tasks assigned by department.
部門分配的其它任務。
任職資格
1. At least 5 years' experience in automation industry, at least lead 1 middle or big logistic project design and commissioning.
5年以上自動化行業工作經驗,至少主導1個中大型物流項目的設計和調試;
2. Good PLC programming skill.
良好的PLC編程能力
3. Familiar with EPLAN, AutoCAD.
熟練運用EPLAN, AutoCAD;
4. Familiar with Siemens PLC, HMI, TIA Portal and WinCC.
熟練使用西門子PLC、HMI、TIA Portal和WinCC;
5. Good communication skill.
良好的溝通能力;
6. Good English reading and writing, good listening, speaking is preferred.
良好的英語讀寫能力,有良好的聽說能力優先;
7. Team-work spirit and pro-active attitude.
具有團隊協作及積極主動的精神;
8. Work under pressure.
能在壓力下工作;
9. Domestic and oversea travel.
能適應國內、國外出差;
10. Experience in automation logistic industry is preferred.
有物流自動化行業經驗優先;
11. Experience in Beckhoff PLC is preferred.
有倍福PLC經驗優先。