職位描述
機械工藝驗證
Position Summary
● DRI of process development during NPI engineering and MP enablement.
● Process/Machine MBO regards lens shaping of different build phase/production iteration.
● Machine(process) capacity ramp-up and improvement.
● Yield ramp-up, improve to responsible processes during NPI and MP initial phase.
● FACA (failure analysis and counteraction) to responsible processes during NPI and MP initial phase.
● CPL (cost per lens) improvement activity driven.
● Next generation production iteration development support, including new process/machine verify.
Responsibilities
● Direct responsible individual of lens shaping technology/process during XR product NPI and MP phase, including new process machine introduce, new process development and customer demand prototyping and post NPI engineering as MP-orientation.
● Qualify in-charge process/machine of lens shaping process with outcome of MBO.
● Enhance E2E process know-how of lens shaping process and proactively synchronize with industry development.
● Ensure all process documents / technical operation established, implemented and up-to-date in time.
● Drive the process implemented correctly as designed.
● Rectify wrong operation and process. Stabilize the process conditions.
● Keep improving process for higher FPY and OEE.
● Support PRO for operator-friendly shop floor environment improve and participate Cost-down activities.
● FACA of responsible processes in collaboration with FA (failure analysis), ME, PRO team.
● Data analysis of general process data for improvement insights.
● Cross-backup to TPE team members for broad knowledge build-up for comprehensive insights of full up-/down-stream process.
● Coordinate process machine recovery with support of ME and OEE improvement activity driven.
Work Experience
● Min. 2 years Process Engineer experience, major in machining or lens shaping. Know-how of mechanical assembly is plus.
● Deep knowledge background and actual application track record of mechanical processing and CNC tooling knowledge.
● Mechanical engineering background (machine design/product design direction). Electrical & Electronics and PLC is plus.
● Optics knowledge is a plus.
● Fresh graduate with good knowledge and passion is acceptable.
Position Summary
● DRI of process development during NPI engineering and MP enablement.
● Process/Machine MBO regards lens shaping of different build phase/production iteration.
● Machine(process) capacity ramp-up and improvement.
● Yield ramp-up, improve to responsible processes during NPI and MP initial phase.
● FACA (failure analysis and counteraction) to responsible processes during NPI and MP initial phase.
● CPL (cost per lens) improvement activity driven.
● Next generation production iteration development support, including new process/machine verify.
Responsibilities
● Direct responsible individual of lens shaping technology/process during XR product NPI and MP phase, including new process machine introduce, new process development and customer demand prototyping and post NPI engineering as MP-orientation.
● Qualify in-charge process/machine of lens shaping process with outcome of MBO.
● Enhance E2E process know-how of lens shaping process and proactively synchronize with industry development.
● Ensure all process documents / technical operation established, implemented and up-to-date in time.
● Drive the process implemented correctly as designed.
● Rectify wrong operation and process. Stabilize the process conditions.
● Keep improving process for higher FPY and OEE.
● Support PRO for operator-friendly shop floor environment improve and participate Cost-down activities.
● FACA of responsible processes in collaboration with FA (failure analysis), ME, PRO team.
● Data analysis of general process data for improvement insights.
● Cross-backup to TPE team members for broad knowledge build-up for comprehensive insights of full up-/down-stream process.
● Coordinate process machine recovery with support of ME and OEE improvement activity driven.
Work Experience
● Min. 2 years Process Engineer experience, major in machining or lens shaping. Know-how of mechanical assembly is plus.
● Deep knowledge background and actual application track record of mechanical processing and CNC tooling knowledge.
● Mechanical engineering background (machine design/product design direction). Electrical & Electronics and PLC is plus.
● Optics knowledge is a plus.
● Fresh graduate with good knowledge and passion is acceptable.
● DRI of process development during NPI engineering and MP enablement.
● Process/Machine MBO regards lens shaping of different build phase/production iteration.
● Machine(process) capacity ramp-up and improvement.
● Yield ramp-up, improve to responsible processes during NPI and MP initial phase.
● FACA (failure analysis and counteraction) to responsible processes during NPI and MP initial phase.
● CPL (cost per lens) improvement activity driven.
● Next generation production iteration development support, including new process/machine verify.
Responsibilities
● Direct responsible individual of lens shaping technology/process during XR product NPI and MP phase, including new process machine introduce, new process development and customer demand prototyping and post NPI engineering as MP-orientation.
● Qualify in-charge process/machine of lens shaping process with outcome of MBO.
● Enhance E2E process know-how of lens shaping process and proactively synchronize with industry development.
● Ensure all process documents / technical operation established, implemented and up-to-date in time.
● Drive the process implemented correctly as designed.
● Rectify wrong operation and process. Stabilize the process conditions.
● Keep improving process for higher FPY and OEE.
● Support PRO for operator-friendly shop floor environment improve and participate Cost-down activities.
● FACA of responsible processes in collaboration with FA (failure analysis), ME, PRO team.
● Data analysis of general process data for improvement insights.
● Cross-backup to TPE team members for broad knowledge build-up for comprehensive insights of full up-/down-stream process.
● Coordinate process machine recovery with support of ME and OEE improvement activity driven.
Work Experience
● Min. 2 years Process Engineer experience, major in machining or lens shaping. Know-how of mechanical assembly is plus.
● Deep knowledge background and actual application track record of mechanical processing and CNC tooling knowledge.
● Mechanical engineering background (machine design/product design direction). Electrical & Electronics and PLC is plus.
● Optics knowledge is a plus.
● Fresh graduate with good knowledge and passion is acceptable.
Position Summary
● DRI of process development during NPI engineering and MP enablement.
● Process/Machine MBO regards lens shaping of different build phase/production iteration.
● Machine(process) capacity ramp-up and improvement.
● Yield ramp-up, improve to responsible processes during NPI and MP initial phase.
● FACA (failure analysis and counteraction) to responsible processes during NPI and MP initial phase.
● CPL (cost per lens) improvement activity driven.
● Next generation production iteration development support, including new process/machine verify.
Responsibilities
● Direct responsible individual of lens shaping technology/process during XR product NPI and MP phase, including new process machine introduce, new process development and customer demand prototyping and post NPI engineering as MP-orientation.
● Qualify in-charge process/machine of lens shaping process with outcome of MBO.
● Enhance E2E process know-how of lens shaping process and proactively synchronize with industry development.
● Ensure all process documents / technical operation established, implemented and up-to-date in time.
● Drive the process implemented correctly as designed.
● Rectify wrong operation and process. Stabilize the process conditions.
● Keep improving process for higher FPY and OEE.
● Support PRO for operator-friendly shop floor environment improve and participate Cost-down activities.
● FACA of responsible processes in collaboration with FA (failure analysis), ME, PRO team.
● Data analysis of general process data for improvement insights.
● Cross-backup to TPE team members for broad knowledge build-up for comprehensive insights of full up-/down-stream process.
● Coordinate process machine recovery with support of ME and OEE improvement activity driven.
Work Experience
● Min. 2 years Process Engineer experience, major in machining or lens shaping. Know-how of mechanical assembly is plus.
● Deep knowledge background and actual application track record of mechanical processing and CNC tooling knowledge.
● Mechanical engineering background (machine design/product design direction). Electrical & Electronics and PLC is plus.
● Optics knowledge is a plus.
● Fresh graduate with good knowledge and passion is acceptable.
工作地點
廣州卡爾蔡司光學(中國)有限公司黃埔區九佛西路1389號
相似職位
- 機械工藝工程師（工藝&機械）7000-9000元·13薪
廣州 - 從化
廣州奧鑫通訊設備有限公司 - TPM Engineer1-1.5萬·13薪
廣州 - 黃埔
卡爾蔡司光學（中國）有限公司 - Optical Design Expert1.3-2萬·13薪
廣州 - 黃埔
卡爾蔡司光學（中國）有限公司 - 鈑金工藝工程師1.3-1.7萬
廣州 - 黃埔
新大禹環境科技(廣東)集團股份有限公司 - 機械工藝工程師6000-12000元
廣州 - 黃埔
廣州市天億行電器制造有限公司 - 研發工藝工程師/生產工程師/PE工藝工程師8000-10000元·13薪
廣州 - 增城
氫合科技(廣州)有限公司
熱門公司推薦
- 霸王茶姬招聘
- 肯德基招聘
- 順豐招聘
- 美團招聘
- 京東招聘
- 餓了么招聘
- 比亞迪招聘
- 中國一汽招聘
- 北京汽車招聘
- 蔚來招聘
- 東風汽車招聘
- 長城汽車招聘
- 奇瑞汽車招聘
- 理想汽車招聘
- 長鑫存儲招聘
- 天江藥業招聘
- 藍月亮招聘
- 安踏招聘
- TCL招聘
- 海信招聘
- 聯想招聘
- 海康威視招聘
- 寧德時代招聘
- 中興招聘
- 新松招聘
- 京東方招聘
- 申通招聘
- 圓通招聘
- 中通招聘
- 百世物流招聘
- 德邦物流招聘
- 麥當勞招聘
- 星巴克招聘
- 海底撈招聘
- 蜜雪冰城招聘
- 瑞幸招聘
- 雀巢招聘
- 騰訊招聘
- 百度招聘
- 快手招聘
- 字節跳動招聘
- 新華網招聘
- 小米招聘
- 招商銀行招聘
- 中信銀行招聘
- 北京銀行招聘
- 興業銀行招聘
- 交通銀行招聘
- 建發集團招聘
- 中國移動招聘
- 中國聯通招聘
- 中國電信招聘
- 中糧集團招聘
- 國藥控股招聘
- 中廣核招聘
- 中國船舶招聘
- 強生中國招聘
- 匯豐中國招聘
- 宜家招聘
- 立邦中國招聘
- 伊利招聘
- 青島啤酒招聘
- 京港地鐵招聘
- 寶馬招聘
- 小鵬汽車招聘
- 華為招聘
- 特斯拉招聘
- 吉利招聘
- 奔馳招聘
- 海爾招聘
- 美的招聘
- 京東方招聘
- 施耐德電氣招聘
- 德邦物流招聘
職位發布者
黃女士/HR
昨日活躍立即溝通
卡爾蔡司光學（中國）有限公司卡爾蔡司集團(Carl Zeiss AG)是全球視光學和光電子工業領域知名的跨國公司，總部設在德國Oberkochen，旗下?lián)碛兴拇笫聵I(yè)群：半導體制造技術、工業質量與研究、光學消費品市場和醫療技術。作為光學領域的先驅，我們持續不斷地探索未知領域。懷揣不懈追求卓越的極大熱情，我們?yōu)榭蛻魟?chuàng)造價值，并激發世界以全新的方式進行視覺體驗。蔡司在您生活的時時刻刻里默默陪伴著，《魔戒》三部曲、《荒野獵人》、《變形金剛：月黑之時》這些耳熟能詳?shù)碾娪?，都是由蔡司電影鏡頭拍攝的。風靡全球的樂高玩具，也使用了蔡司的技術，通過蔡司精準的工業測量技術，讓每個小方塊都能契合地拼在一起。蔡司在尊重員工權益方面也有悠久的歷史，100多年前，蔡司的創始人之一阿貝博士便在蔡司推行8小時工作制、有薪假期、有薪病假、退休金等制度，讓蔡司公司成為現代雇員保障制度的先導者。數字化和網絡正極大地加速全球化。強大的新公司正在建成，并在逆轉著整個行業。只有那些有強有力的架構和靈活應變的公司才能保持競爭力。蔡司擁有約 30,000名員工，業務遍及全球近 50個國家，擁有約 60家自己的銷售和服務公司，30多個生產工廠和約25個開發基地。蔡司 90%的營業額都來自于德國境外。在廣州中新知識城的蔡司制造基地中，視力保健和醫療技術兩大事業群強強聯合。我們擁有：-智能制造基地：視力保健事業部全球產能和產值***的大規模制造基地，連三年蟬聯全球精益評選的***名-高端定制車房：應用全球最先進的自由成型加工技術，引領的創新為全球客戶提供高品質處方鏡片的加工中心。-醫療器具制造商：蔡司中國區新業務，為全球市場提供高端眼科治療所需的醫用耗材。公司福利：基本保障：－5天8小時工作制；－年終雙薪；－為員工購買多種社會保險及商業保險；－購買住房公積金；－有薪年假、服務假，有薪病假及婚假、產假等多種假期；－工作日提供往返市區班車；蔡司定制：－員工生日活動；－部門團隊建設；－員工配鏡福利；培訓發展：－各層級及個人針對性的培訓課題；－國外培訓機會；－員工康樂委員會組織豐富多彩的業余活動。我們期待責任感強、工作態度積極主動、有團隊精神的人才加入我們，一起創造一個令人振奮和輝煌的未來。
公司主頁