- GENERAL STATEMENT OF RESPONSIBILITIES(主要工作職責)
質量工程師的主要工作職責為負責過程質量管控&客戶投訴管理。
Quality Engineer is mainly responsible for all process quality control and dealing with customer complaint:
1. 負責穩健過程設計的先期質量計劃,作為PFMEA的主要貢獻者和CP的所有者
Be responsible for advanced quality planning for robust process design, key contributor of PFMEA and owner of CP.
2. 負責過程質量控制,通過過程審核、工作紀律審核、過程能力研究等方式,保證過程質量
Be responsible for process quality control to guarantee built in quality via process audit, working discipline audit, process capability study and so on.
3. 熟練應用質量工具,組建CFT小組,解決質量問題,與CFT小組進行實際質量數據分析,啟動質量改進項目
Organize quality trouble shooting with CFT and as problem solving expert. Initiate quality improvement project based on actual quality data analysis with CFT.
4. 負責生產過程中可疑產品的風險評估和質量判斷,作為生產過程中質量判斷的負責人
Be responsible for risk assessment and quality judgement of suspicious products in production, owner of quality judgement in production.
5. 領導所有客戶對質量問題的審核/拜訪,跟蹤審核過程中發現的問題,直至解決問題.
Lead all customer audit/ visit about quality issues, follow up finding/open issue during the audit till close
6. 協調工廠和客戶之間的客戶投訴和售后調查索賠, 協調相關的分類和遏制,如有需要,提供所有客戶調查報告。
Customer complaint and warranty investigation,claim negotiation, coordination between plant & customer, coordinate relative sorting and containment actions,all customer survey report if needed.
7. 參與工程變更管理和生產線工藝審核,從質量角度密切監控,推動已投產部件的工藝持續改進活動,廢品率持續降低,支持VAVE和內部質量成本優化項目
Be engaged in engineering change management and production line process audit, drive process continual improvement actives for launched parts with close monitoring from quality perspective, scrap reduction continuously, support VAVE and quality cost reduction projects.
- JOB REQUIREMENTS(職位要求):
1. 機械工程、工業工程或相關專業本科以上學歷, 有相關工作經驗者優先
Bachelor’s degree or above majored in mechanical engineering, industrial engineering or related area.
2. 英語四級及以上,可作為工作語言溝通交流
CET-4 or above, English can be used as a working language for communication.
3. 熟悉APQP&CP、SPC、FMEA、PPAP、8D、等質量管理工具和IATF16949
Knowledge of APQP & CP, SPC, FMEA, PPAP, quality management and IATF16949
4. 能夠承受工作壓力, 良好的溝通能力、團隊合作精神
Under high work pressure and good at communication, with teamwork spirit.