Job Profile: Engineering ＞ General Engineering
SUMMARY
Responsible for the Test Engineering Process and the attributes that can affect the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Analyze daily process yield reports that will include, but not limited to the following: operator errors, defective product, test equipment/test defects, RMA product defects, and spear corrective actions.
- Increase production yields by understanding and reducing operator errors and driving manufacturing and test engineering defects back to the appropriate department.
- Assist Test Engineer in developing preventative maintenance program and assure compliance to reduce downtime and increase process yields throughout the process.
- Analyze downtime sheets recording downtime of a station to set guidelines for preventative maintenance scheduling.
- Ensure all process manuals and documentation are maintained properly.
- Review all 5x5 tests to ensure that they were performed and adhered to.
- Perform walkthroughs, inspections, product evaluation and testing as needed.
- Conduct NPI test evaluations.
- Prevent test escapes.
- Ensure product testing completeness and reliability.
- Update and generate documentation as required.
- Assist Project Test Engineer with test process review.
- Evaluates test probes.
- Set-up equipment to perform any required programming and verification test following established procedures for the specified operations to be performed.
- Ensure quality (work meets or exceeds Jabil Workmanship Standards) and improve efficiency through the use of the SPC system when available.
- Operates automated electronic test equipment on manufactured circuit board assemblies and subassemblies.
- Responsible for maintaining a continuous flow of the manufacturing line and meeting production goals while performing the assigned test duties.
- Label and stamp boards, and fill out tags.
- Advise supervisor of any recurring test failure so that prompt corrective action may be taken.
- Ensure assemblies are properly handled and marked.
- Ensure daily logs and move/production tickets are accurately maintained.
- Follow simple, standardized and routine written directions for assigned test operations.
- Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
- Comply and follow all procedures within the company security policy.
- May perform other duties and responsibilities as assigned.
MANAGEMENT & SUPERVISORY RESPONSIBILITIES
- Typically reports to Management. Direct supervisor job title(s) typically include: Production Supervisor, Production Manager
- Job is NOT directly responsible for managing other employees (e.g., hiring/termination and/or pay decisions, performance management).
JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS
- Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
- Ability to write reports, business correspondence, and procedure manuals.
- Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
- Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
- Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
- Ability to define problems, collect data, establish facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
EDUCATION & EXPERIENCE REQUIREMENTS
- Associates of Science in NT Electronics or Electrical Engineering or Technical Certification preferred
- Three (3) to five (5) years experience
- Or an equivalent combination of education, training or experience
工藝工程師
1.工藝流程設計與優化：負責新產品導入的工藝方案設計，制定工藝流程圖相關標準與要求等。分析和優化現有生產工藝，解決生產瓶頸，提升生產效率和產品直通率。
2.工裝夾具設計與開發：根據生產需要，設計或提出工裝、夾具、治具的需求，并參與驗收和改進，以提高生產自動化程度和操作一致性。
3.生產問題解決：快速響應并解決生產現場出現的各類技術問題（如質量缺陷、設備異常等），進行根本原因分析并實施糾正與預防措施。
4.質量控制與標準制定：制定工藝質量控制點和檢驗標準，確保生產過程符合質量體系要求。運用統計過程控制等工具，監控工藝穩定性。
5.成本控制： 通過工藝改進，降低物料損耗、提高設備利用率、優化人力配置，實現降本增效。
6. 技術文檔編寫：編寫和維護各類工藝文件，如工藝卡、PFMEA、BOM等，確保文件的準確性和有效性。
7. 新設備、新技術的引進：參與新生產設備的選型、調試和驗收，并負責相關操作人員和維護人員的培訓。
8.具體數字化思維與能力，利用數字化手段與工具，實現工藝的優化及對相關數據進行挖掘并應用從而產生價植。
要求
1. 英語六級，具備良好的英文文檔閱讀與溝通能力，口語流利優先。
2.熟悉CAD/CAE制圖軟件，熟練使用至少一種：AutoCAD, SolidWorks, UG/NX, CATIA, Pro/E。
3.扎實的工程理論知識，有一定的自動化編程基礎及工藝仿真與分析能力。
4.溝通能力強，能夠主動與工作的合伙人進行溝通，達成工作的目標。
5.良好的抗壓能力，具有持續學習能力及創新意識。
6. 機械、電子、自動化、工業工程、物理、電氣工程相關專業，本科以上學歷